Titanium carbide powder particles used to produce hard surface materials
Titanium carbide is a retest material produced by special technology with titanium powder as the main raw material.
- Standard
Titanium carbide is a retest material produced by special technology with titanium powder as the main raw material.
one Product Features:
1. TiC appearance and light gray. Face-centered cubic structure. Insoluble in water. It has high chemical stability. It has little chemical reaction with hydrochloric acid and sulfuric acid, but can be dissolved in aqua regia, nitric acid and nitrofluoric acid. It also dissolves in solutions of basic oxides.
2. Relative molecular weight: 59.91
3. Density: 4.93g/cm3
4 Melting point: 3160 ℃ Boiling point: 4820 ℃
5. With high hardness, corrosion resistance, good thermal stability
6. Titanium carbide is a typical transition metal carbide. It is composed of ionic, covalent and metallic bonds mixed in the same crystal structure. So titanium carbide has many unique properties. The crystal structure determines the basic characteristics of titanium carbide such as high hardness, high melting point, wear resistance and electrical conductivity. Titanium carbide ceramics are widely developed among titanium, zirconium and chromium transition metal carbides.
two Product Application:
1. Widely used in steel bonded gold
2. Widely used in ceramic alloys: Tic is also widely used in ceramic alloys because of its high hardness, corrosion resistance and good thermal stability.
3. Widely used in wear-resistant materials: wear-resistant and hard-faced materials are the rapidly developing industry in recent years. Because of its unique properties, Tic is widely used in this industry. In addition to the requirements of various physical and chemical indicators to meet the standard, Tic also requires the strength of particles and particle size uniform concentration.
4. It is used as a deoxidizer in the steelmaking industry and can also be used in the electronics industry.
Physical Properties:
1. Medium fine particle powder
Brand | Chemical composition(%) |
FSSS(μm) | ||||||||
Content of impurities(≤%) | ||||||||||
T.C | F.C | Fe | Si | Ai | O | N | Na | Ca | ||
WSTt-1 | ≥19.0 | ≤0.40 | 0.10 | 0.05 | 0.01 | 1.20 | 0.50 | 0.01 | 0.02 | ≤1.0 |
WSTt-2 | ≥19.0 | ≤0.35 | 0.06 | 0.05 | 0.01 | 0.60 | 0.30 | 0.01 | 0.02 | 1.5-2.0 |
2. Coarse grain powder
Brand | Chemical composition(%) | ||||||||
Content of impurities(≤%) | |||||||||
T.C | F.C | Fe | V | Mo | O | N | Co+Ni | Cr | |
WSTt-3 | ≥19.0 | ≤0.40 | 0.25 | 0.10 | 0.30 | 0.50 | 0.30 | 0.61 | 0.10 |